It automatically jets and sterilizes the inner and surface of the can. All the materials are made of stainless steel.When the tank turned into the first tank after tank-cleaning ,and appearance under the temperature by a porous pipes with red spray,0.5meters can then rotate in order to achieve the purpose of cleaning ,and then turned the extension device can slide into the next chain road.Pay attention to the cans in the slipway are not stopped,to prevent irrigation water controlling line speed is not the net.
The machine is suitable for filling and sealing effervescent pop can beverages in the industries of pop can beverages (beer/carbonated drinks).The filling and seaming are of integral design. The principle of equal pressure filling is adopted. During the filling ,after the empty can reaches into the can lifting cylinder after passing through the pneumatic triplex parts, and the empty can is raised and the conical seal gasket under the filling valve is sealed. The position and block of the filling valve turns the position and opens the valve under the action of another cylinder. The air is filled into the empty can to form equal pressure. Form a large material barrel, the beer passes through 14 small conduits and flows into the empty can. When the liquid level in the empty can blocks the gas return pipe mouth, the filling stops. Under the action of ram, the defoaming valve will slowly discharged the air and pressure. The can supporting cylinder will continue to fall. After it is discharged, the can is sent to the sealing machine for sealing by the hook chain that runs synchronously.
The main electrical components adopt Siemens PLC,VFD converter and Omron close switch, Germany Siemens analog output and electromagnetic valve from South Korea, all of which are designed into the most reasonable configuration by our experienced electric engineers. The overall production speed can be set freely on the touch screen according to requirements.