15BBL Beer Brewing Equipment

15BBL Beer Brewing Equipment

15BBL beer brewing equipment Hello, my friend, Welcome to Shandong Ruijia brewing group, start your beer world. Characteristic of 15BBL commercial beer brewing equipment • Mash Lauter Tun with grist hydrator • Kettle Whirlpool Tank with heating jacketed • Grant Tank • Stainless steel...

Product Details

15BBL beer brewing equipment


Hello, my friend,

Welcome to Shandong Ruijia brewing group, start your beer world.


Characteristic of 15BBL beer brewing equipment

   • Mash Lauter Tun with grist hydrator

   • Kettle Whirlpool Tank with heating jacketed

   • Grant Tank

   • Stainless steel Platform

   • Plate Heat Exchanger

   • Sanitary Wort Pump x2;

   • Wort Oxygenator;

   • Semi-Auto Control Panel;

   • Interior surface to finish pickled and passivated

   • Exterior surface to brushed, #4 finish

   Or

   •Interior surface to polished to RA≤0.22μm

   •Exterior surface adapts satin polish.

 

  Method of Heating Ways:

  • Steam: Dimple plate jacket with inlet/outlet fittings for Steam heat transfer;

  • Electric: Use electric heaters in jacket to heat the medium in the jacket

  • Gas fired: Use gas burner at bottom to heat tank directly;



 

Description of 15BBL beer brewing equipment



No.

Name

Components

Specification

1

Grain Milling    Unit

Rolling    Miller

Double    roller
     Speed differential

2

Brewhouse unit

Mash/Lauter    tun

Grain    rake with VFD
     Laser cutting V-wire False Bottom
     Easy clean and detachable sparging spray ring
     Multihole wort collect ring(optional)
     Anti-rinser(optional)

Kettle/Whirlpool    Tun

Steam    Jacket on bottom and side/direct gas fired heating/electric heating
     Steam vent with condensate ring for kettle stack

Hot    water tank

Steam    Jacket heating/direct gas fired heating/electric heating

Heat    exchanger

SUS304    plate

3

Fermentation    unit

Fermenter

Glycol    cooling jacket on cone and bottom
     Side or top manway
     CIP arm and CO2 blow off arm
     Germany import Kieselmann Mechanical relief valve
     Shockproof pressure gauge
     Rotating racking arm
     Dry hopping port
     Carbonation stone
     Sight level

4

Bright    beer tank

Bright    beer tank

Glycol    cooling jacket on cone and bottom
     Side or top manway
     CIP arm and CO2 blow off arm
     Germany import Kieselmann Mechanical relief valve
     Shockproof pressure gauge
     Rotating racking arm
     Dry hopping port
     Carbonation stone
     Sight level

5

Glycol Chilling    Unit

Glycol    Water Tank

Insulated    conical top and sloped bottom

Cold    Water Tank

Dimple    plate on side wall

Chiller

 

6

Control    unit

Brewing    and fermetation process Controlling

Manual    button control panel or PLC control with touch screen for special

7

CIP unit

Caustic    Tank

electric    heating element inside

Sterilization    Tank

 

Transfer&Control

 

8

Others

 

 

 


image006.jpg

 

Two Decoction Mashing Process Steps

---Mash/kettle,lauter tun, whirlpool tun and hot water tank

Step1. Pump some hot water from the hot water tank into the mash/kettle tun, then add some cold water to make the water reach the suitable temperature of 37℃ for the raw material and control the water quantity (for 1000L brewing system, the water for raw material is 800L, the  original wort concentration could reach 10 to 12 °P) .

Step 2. Start to add raw material(proteolysis): start the mixing system of the mash/kettle tun, put the milled barley into the mash/kettle tun, mix evenly, stop mixing, then begin to time; (if it is wheat type beer, add milled barley at first, mix evenly and then add the milled wheat, mix evenly; keep the temperature of adding raw material 37℃ for 20 minutes).

Step 3. Start mixing, open the steam valve, rise the temperature of the mash/kettle tun, control the speed of temperature rising by 1℃/min. When the temperature reaches to 53℃, stop mixing, keep this temperature for 60 minutes.

Step 4. After 60 minutes, pump 2/3 amount of the wort into the lauter tun, start the mixing of mash/kettle and steam valve again, heat the rest 1/3 wort until it is boiling and keep it boiling for 30 minutes. Switch off the steam valve, then pump the wort from the lauter tun back to the mash/kettle tun, make them mix evenly and make the temperature reach to 76-78℃.

Step 5. Pump 2/3 amount of the wort into the lauter tun again. Start the mixing and steam valve of the mash/kettle tun, heat the rest 1/3 wort until it is boiling. Switch off the steam valve, then pump the rest wort from the lauter tun into the mash/kettle tun, make them mix evenly and make the temperature reach to 76-78℃. Stop mixing and prepare to lauter the wort.

Step 6. Add some water in the lauter tun, control its level just submersing the sieve. Start the mixing motor, some related valves and mash pump, pump all the wort into the lauter tun, switch off the mash pump. Continue mixing for 5 to 8 minutes. After the wort being mixed evenly, stay for 10 to 15 minutes and prepare to flow back and lauter. 

Step 7. Wort back flow: Pay attention to the time of staying, after the staying, begin to flow back the wort. Switch on the related valves and lauter pump, make the wort flow back in the lauter tun for 5 to 10 minutes. When the wort in the sight glass becomes bright, switch to some related valves and pump the wort into the mash/kettle tun. 

Step 8. Determine the beer original wort concentration: after 20 minutes of lautering, take some sample to determine the beer original wort concentration.

Step 9. Prepare the water to wash the spend grain: switch on the heating valve of the hot water tank, rise the water temperature to 78℃.

Step 10. Wash the spend grain: Original wort lautering to the time when the spend grain begins to emerge, start to mix, add water to wash the spend grain, then stop mixing. When the new lauter bed formed, repeat the former lautering process. Usually wash the spend grain for twice to three times, pay attention the quantity of adding water.

Step 11. Mixture wort concentration determine: after twice to three times washing the spend grains, determine the mixture wort concentration.

Step 12: Remove the spend grain: after twice to three times of washing the spend grain and the mixture wort concentration reaching to the suitable value, stop lautering. Start the lauter scrape plate to push the spend grain to the spend grain door, open the spend grain door, using the rake to remove the spend grain manually.

Step 13. Cleaning: After removing all the spend grain, using clean water to clean the lauter tun, false bottom and racker, open the drain outlet of the lauter tun to discharge all the remained spend grains. 

Step 14. Switch on the steam valve, rise the temperature of the mash/kettle tun, boil the wort. At the same time, start mixing, make the wort be heated evenly. When the wort has been boiling for 5 minutes, add biter hops. 10 minutes before finishing the boiling, add aroma hops. The total boiling time usually lasts for 60 minutes. After completing the boiling, whirlpool the wort and discharge the drain.

Step 15. Cool the wort through heat exchanger and add some suitable oxygen and pump the wort into fermenters.

 

image008.jpg

 



Hot Tags: 15bbl beer brewing equipment, China, manufacturers, suppliers, factory, for sale

Related Products

Inquiry