1.Thermal insulation material: Polyurethane (PU) foam, Insulation thickness: 75-100MM.
2.Manhole: Side manhole or top manhole
3.Design pressure 3bar, Working pressure: 15bar;
4.Bottom design: 60degree cone for easy to exist yeast.
5.Cooling method: Dimple cooling jacket
6.With: CIP arm with spray ball, pressure gauge, Mechanical pressure regulating valve, CO2 adding device, sampling valve, breath valve, Ice water solenoid valve, thermometer, etc.
7.Surface protection, weld slinging band with stainless steel leg, adjustable bolt to adjust leg height;
8. Argon arc welding, Inside and outside the polishing, No welding corner to ensure the quality of the fluid
1. PT100( testing the wort temp in the fermenter tank),
2.Dimple plate cooling jacket( Ice water cycle, Lower wort temperature),
3. PU: ( Isolated temperature transfer， keep wort colder)
4. Ice water solenoid valve（ control ice water pump)
Fermenter tank temp control and adjust processing as below:
1. Enter the fermentation temperature to the control cabinet.
2. PT100 testing the temp of the wort in fermenter tank.
3. If the wort temperature is higher than the input control cabinet temperature,
4. The control cabinet transmits the signal to the ice water solenoid valve.
5. Ice water solenoid valve to receive the signal, control the ice water pump to start work, ice water into the dimple plate cooling jacket for the wort cooling.
6. When the wort temperature is equal to the input control cabinet temperature, the ice water pump stops working.
7. PU isolation temperature transfer, keep the fermentation temperature.
We have many years' exporting exporting experiences. And we know exactly what is good for safe sea delivering.
All the vessels that your order will be fixed on solid iron frame if your equipment use whole container to deliver them to you.
If your equipment is delivered by LCL, your vessels and good will be packaged in a solid wooden case. We make sure that you will receive your equipment in best condication.
We only cooperate with the most secure shipping company to deliver your equipment to your nearest port and we can take care of every delivery things in China, you don't need to worry about the small issue, and focus on your business.
1. Q: Can you do OEM or ODM?
A:Yes, we can do.
2. Q:What's the fermenter pressure?
A:Three bar or customized.
3. Q:Can you do PLC control system?
A:Yes, we can do. You only need throw the malt and hop, then it will brew beer by itself, our PLC system has passed CSA certificate.
4. Q:How to do temperature control?
A:A2 The PLC or digital display meter can control the temperature via connecting with the PT100 sensor. Insulation keep the temperature.
5. Q:Can you do OEM or ODM?
A:Yes, we can do.